Wow. Looks about what I was aiming for. You have any pics of the structure itself?
Announcement
Collapse
No announcement yet.
Randy's dreams do come true oven build
Collapse
X
-
Saluki I don't know if you ment Thomas or me but my roof line is about 6' in the back and around 8.5' to 9 ' in the front. I just kinda eyeballed it when I built it. If you want the exact measurement let me know and I can get it for you.
Randy
Comment
-
Originally posted by Saluki View PostAlso. What is the height of the front and rear roof lines. How much chimney pipe?
Comment
-
Shaping up nicely. FYI, some builders pour in dry perlite or verm. after the enclosure is up for additional insulation. Relatively cheap.Russell
Google Photo Album [https://photos.google.com/share/AF1Q...JneXVXc3hVNHd3/]
Comment
-
I thought about that as well, but I want to have an access panel for electrical and the thermocouples as I haven't finalized how I want to display the temperatures. There are 4 channel data loggers available on eBay, but they've gone from $130 to $250+ in a month. I will likely post-pone that decision to August!
Comment
-
Originally posted by UtahBeehiver View PostShaping up nicely. FYI, some builders pour in dry perlite or verm. after the enclosure is up for additional insulation. Relatively cheap.
Comment
-
Originally posted by RandyJ View PostI poored in 36 cf of vermiculite over the top of the dome and filled the enclosure. It is not expensive but 12 bags start to add up
I agree, things starts adding up. I ran up another $500 bill at HD/Menards yesterday getting all the stuff to build the roof.. I've got 3" of fiber blanket over the dome and 4" board below. I'm fine with having perhaps slightly lower performance over the flexibility I lose by filling it up with vermiculite. I may get started on stucco tomorrow!
Comment
-
I hear you there. I think I ended up spending roughly twice what I had bugeted. I was right on till I started the exterior and then everything cost at least twice what I thought. I also had not thought of everything and had a few problems to solve that cost money too. But it is all worth it in the end.
Randy
Comment
-
Just have the weigh the cost of adding ceramic blanket or dry perlite/vermeculite. Just presenting options of what other builders have done when they have an enclosed oven. There is a point of diminishing returns.2" is probably the minimum amount of ceramic insulation on the dome.Russell
Google Photo Album [https://photos.google.com/share/AF1Q...JneXVXc3hVNHd3/]
Comment
-
Russell is right I would say 2" is the bare minimum for ceramic blanket. I would also guess it to be cheaper to add one more layer of blanket than to fill with vermiculite. I used 12 bags at 15$ each to fill the cavity inside the enclosure. So that was 180$I think that is more than I spent on 3 layers of ceramic blanket. So you need to decide how much you want to spend and follow the route that leads you to. Your cheapest bet is one more layer of blanket and that would be where I would start.
Randy
- 1 like
Comment
-
Comment