Announcement

Collapse
No announcement yet.

Elizabeth's oven

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • christo
    replied
    Re: Elizabeth's oven

    I love the blue brick!!! Where did you get it? Smurfs making pizza!!

    progress looks very good!

    I spent part of the afternoon fixing mistakes on my foundation pour - cutting and grinding the edge back so it won't show when I put the patio pavers in...

    Looks like you are having way more fun than me!

    Christo

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    It's closed up! I templated the hole, sawed and ground two bricks to fit, mortared them together, and stuck it in.

    I still have to do a lot of clean up tomorrow and also get the outside coated to even out the mass where I didn't fill in the angles as I went. A good day's work, for sure. I'd like to get the outer arch done as well, then I can do the flue transition when I get back.

    Then I can leave it alone while I go to the beach and commune with the waves and the sand....

    And come home and make fire!

    Leave a comment:


  • sarah h
    replied
    Re: Elizabeth's oven

    Elizabeth, your oven is looking terrific - nice job!
    Given how you've progressed up to now, closing the top shouldn't hang you up for long.
    The height sound good. As for cleanup, I'd just get what you can reach and don't sweat what you can't - no one but you is going to be sticking their head in there.
    Exterior bumps - they'll get covered over even if your finish maintains the beehive shape. What finish style are you thinking of anyway?

    Sarah

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    I'm not really hung up on the non-gender specific terminology, so workmanship is just fine with me. Cuts down on typing letters!

    I did get another round done- now I have to figure out how to close it up.

    I do have a few really high spots on the outside- from some bad breaks on the bricks- and I can't cover them all up, so I think I will have to grind at least a few. I promise not to get too compulsive about it! I have that same mental picture about fingers, etc, every time I start up a power tool. It pays to have a healthy respect for them. My dad's the only guy I know with a radial arm saw who still has ALL his fingers and knuckles. I hope I didn't just jinx him...

    The height is coming in at just about 18 1/2 inches, which is pretty good for a 36 inch oven, I hope. I was going for 20, but it shrank as I went.

    I have no idea how you all get in there to clean it up- and did you wear goggles or something so you didn't get it all in your eyes? I swear I don't think I'll fit!

    Leave a comment:


  • christo
    replied
    Re: Elizabeth's oven

    Elizabeth - Really nice job.

    Was going to put my flame retardant suit on and say that's really nice job for a g*rl, but it wouldn't be true - it's truely a nice job for anyone.

    I'm not sure I'd grind down any points on the outside - you'll cover it up with heatstop/homemade stuff and insulation soon enough. I winced the entire time I ground on my archway to clean up a few misfit joints in order to make the smoke transistion through the archway as cleanly as possible.

    I kept mentally seening the whole thing fall down (kinda like seeing my fingers leaving my hand shortly before using my table saw... creepy - yeah - tmi)
    but that kept the grinding to a minimum.

    I think maintaining a perfect circlular opening at the top is awesome and really shows off your workpersonship, but I don't think I've looked at the top of my oven since I crawled inside to do the final pointing and sponge down of the interior.

    I can't wait to see how you finish the outside. Thanks for sharing!

    Christo

    Leave a comment:


  • DrakeRemoray
    replied
    Re: Elizabeth's oven

    I had to google that "beehive oven on wheels" for a mere $2000 plus $200 shipping

    Williams-Sonoma | Beehive Pizza Oven

    It even has a video on the page...lol

    Drake

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    next question- how big is the plate for the duravent 6" pipe? I know the 8" is 12 " square. I think I will be using the 6" chimney since that's the size the plans call for in a 36" oven. I'm looking at a 36" length, with a cap, and I'm still undecided as to the final finish- I like the way it looks with stucco over it, but it looks as though there may be a problem later if I need to replace a piece.

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    I'm nearly there.

    The bricks are nearly vertical, the hole is almost round again, the transition to the arch looks ok- not beautiful, but it's hanging on ok and seems pretty firm. I have a little pointing to do inside in a couple of places, and a lot of cleaning off to do. I've been brushing it with water when I'm done, but I think it's still a little cruddier than I am happy with. Then next question is, can I fit in there to clean up? I may have to rent a kid to climb in it!

    I just opened my last bag of heatstop, so I have enough to finish, I think, but not enough to coat the outside without homebrew. I've been collecting the clay from my cutting- I hope I have enough to clad the outside with homebrew and what's left of the heatstop50. When I have it closed up, I will also go around and grind off some of the worst of the 'sticker-outers' of my half bricks outside.

    We ate at a friend's house last night- she showed me a catalog with a "beehive oven on wheels" for a mere $2000 plus $200 shipping... the outside diameter is 36, the arch is too high, the vault looks too high, and I don't think there's enough mass to really do a good job if you want retained heat cooking. 5 months ago I would have thought it was the bee's knees, but it's amazing what you learn here!

    I'm hoping to get another round done this evening- the push is on to get ready to go to the beach as well as finish this up. And there's the small matter of what looks to be a bushel of beans in my fridge- I have to get those put up too!

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    Les,
    Wilson has apparently been taking pictures of me while I am standing on my head inside the oven! I still had my earplugs in and never heard a thing....

    I think I can make a couple of wedges to round the oven back out. It looks like that's what Ken did. If I had used the smaller bricks there instead of the halves, I probably could have lessened the V a bit. Oh well- live and learn. And go back and fix.

    George- I have looked at the masonry heating page before- I think what they do looks really cool. It's enough to make me want to put one in my next house...

    Leave a comment:


  • George T
    replied
    Re: Elizabeth's oven

    Elizabeth,

    I had that same V. I just went with it. In some ways I felt it kinda made the finalization of my dome easier. More of a straight line vs the circle. Check out the picture of the squirrel tail oven on the following web page.

    The Brick Bake Oven Page

    Leave a comment:


  • Les
    replied
    Re: Elizabeth's oven

    It's looking great - and I love the shade of your blue bricks It's funny about the "V" at the arch. I think everyone of us has hit the same wall. I saw it coming about one course before closure and was able to compensate a little. At the end of the dome it will be gone - don't fret it.
    Vacation??? You have an oven to build Babe...

    PS Where is Wilson?

    Les...

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    ok. So I can cure when I get back from vacation- if I get finished before we leave, that is. I did get 2 courses done today- my back is not happy but it's good to feel like I'm catching up from the rain delay!

    It makes sense to see if you're going to have failure before getting it too involved. I know there's more likelihood of mine doing that than yours, though- mine is much less tidy and exacting.

    I'm not happy with the V I have at the arch now- I'm going to have to figure out a way around that tomorrow. I'm sure it will involve grinding, earplugs and dust mask.

    My pile of bricks is dwindling fast, I hope I have enough!

    Leave a comment:


  • Ken524
    replied
    Re: Elizabeth's oven

    Elizabeth,

    I put my blankets on, did the curing sequence, then enjoyed our first pizza. This way, if I had any catastrophic failures, I could take the blankets off and make repairs.

    After I put on the wet vermiculite/cement, I let it all sit for about a week to let the vermicucrete cure and dry as much as possible on its own. Then I did a couple of hot fires to drive out any remaining moisture before ramping up to nuclear. No problems.

    Leave a comment:


  • egalecki
    replied
    Re: Elizabeth's oven

    I just ordered my blanket from the FB store.

    I know I've seen people cure their oven before the blanket goes on, but if you're using vermicrete outside, don't you have to put that on over the blanket, let THAT dry a week and THEN cure? Otherwise it'll be soggy again after you put on the vermicrete, won't it? And then you'd have to cure it again?

    Or have all the people doing curing before the blanket is set been making little houses around their ovens, and not using the vermicrete at all?

    Ok, back to cutting bricks (now in the handy dandy 1/3 size!) and making another row!

    But first, some more sunscreen.

    Leave a comment:


  • christo
    replied
    Re: Elizabeth's oven

    Looking super! The brick transistion to arch looks fine!

    Christo

    Leave a comment:

Working...
X