Announcement

Collapse
No announcement yet.

36" WFO in Candia, NH, USA

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    More great info, thanks again! I'm drafting up my design and will post it for advice, in the proper location of the forum. Cheers

    Comment


    • #17
      More great info, thanks again! I'm drafting up my design and will post it for advice, in the proper location of the forum. Cheers

      Comment


      • #18
        Michael, I recommend all new builders read the thread linked below. Good information about what would folks do differently. Several builders echo what Russell said above, just doing a bevel on the sides of the bricks to keep internal joints tight would save a lot of time with little to no effect on oven performance or looks. You will use more mortar, but if you are going the homebrew route it is relatively cheap.

        https://community.fornobravo.com/for...change?t=12453
        My build thread
        https://community.fornobravo.com/for...h-corner-build

        Comment


        • #19
          Michael, I recommend all new builders read the thread linked below. Good information about what would folks do differently. Several builders echo what Russell said above, just doing a bevel on the sides of the bricks to keep internal joints tight would save a lot of time with little to no effect on oven performance or looks. You will use more mortar, but if you are going the homebrew route it is relatively cheap.

          https://community.fornobravo.com/for...change?t=12453
          My build thread
          https://community.fornobravo.com/for...h-corner-build

          Comment


          • #20
            Thanks JR! That's sounds like a great way to go. I learned a few other things from that thread as well.

            Comment


            • #21
              Thanks JR! That's sounds like a great way to go. I learned a few other things from that thread as well.

              Comment


              • #22
                Should I continue to post progress here, or start a new post under Brick oven photos?

                Comment


                • #23
                  Should I continue to post progress here, or start a new post under Brick oven photos?

                  Comment


                  • #24
                    Start a thread under "Pompeii Oven Construction" and I will merge current post to it.
                    Russell
                    Google Photo Album [https://photos.google.com/share/AF1Q...JneXVXc3hVNHd3/]

                    Comment


                    • #25
                      Start a thread under "Pompeii Oven Construction" and I will merge current post to it.
                      Russell
                      Google Photo Album [https://photos.google.com/share/AF1Q...JneXVXc3hVNHd3/]

                      Comment

                      Working...
                      X