Announcement

Collapse
No announcement yet.

New pre-cut kit build in Adelaide

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • applor
    replied
    Re: New pre-cut kit build in Adelaide

    wrong thread?

    Leave a comment:


  • ErinArdill
    replied
    Re: New pre-cut kit build in Adelaide

    we had a look at a some display homes and found Format homes to be a good pick out of the lot. Also, one of my Mrs friend built a home with Weeks & Macklin and she was happy with their quotation,service and quality. I haven't heard any positive reviews for Fairmont homes so they are out of my list.

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Originally posted by applor View Post
    Just noticed with this kit from Ben that the door is right at the entrance to the oven and not the dome.
    Should it not be in between the dome and the flue to avoid all the heat escaping up the flue overnight?
    Hi Applor
    My photos may have confused you. Both Ben's door and my home built insulated door close the dome. I place the insulated door in dome and then Ben's door at front to store them out the way when not using oven.

    Leave a comment:


  • applor
    replied
    Re: New pre-cut kit build in Adelaide

    Ben do you sell/make an inner door for your kits at all?

    Leave a comment:


  • Greenman
    replied
    Re: New pre-cut kit build in Adelaide

    If you want to maintain heat in the dome you will need an insulated door that closes to the inner arch or seals inside the flue. There are a few different doors and it sounds like yours is not meant for the purpose of retaining heat in the dome.

    Leave a comment:


  • applor
    replied
    Re: New pre-cut kit build in Adelaide

    Just noticed with this kit from Ben that the door is right at the entrance to the oven and not the dome.
    Should it not be in between the dome and the flue to avoid all the heat escaping up the flue overnight?

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Just out of oven, Best bread bake so far, two sourdough and four crusty Italian white.
    Cooking six at once really kept the steam in oven.
    Will repost in what's cooking, just had to show off.

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Originally posted by applor View Post
    Going to look fantastic with the granite bench tops in place!
    So you plan to brick all around your oven and then maybe lay tiles at 45 degree slope on the front?
    Hi Applor
    The tles will be vertical on the 45 degree corner of slab.

    Leave a comment:


  • applor
    replied
    Re: New pre-cut kit build in Adelaide

    Going to look fantastic with the granite bench tops in place!
    So you plan to brick all around your oven and then maybe lay tiles at 45 degree slope on the front?

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Build update - completed brickwork for remainder of outdoor kitchen, measuring up for 30mm Adelaide Black granite tops for benches and oven surround.

    Have to build up slab with perlite cement to 30mm below cooking floor and place split face bricks to finish. Might add some tiling to 45 degree front edge

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Posted some details of new insulated door on 'Show us your door ' thread.

    http://www.fornobravo.com/forum/9/sh...tml#post170496

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Originally posted by Ash71 View Post
    Hi Liteceeper,

    I am building atm and would like to know how you finished off the same level as your oven floor?

    Ashley
    Hi Ashley
    Sorry I cant help you out, I have fallen into the category of got oven to cooking stage and haven't progressed further.
    But started 3 weeks leave today so might complete build now some cooler weather is with us.

    Leave a comment:


  • Ash71
    replied
    Re: New pre-cut kit build in Adelaide

    Hi Liteceeper,

    I am building atm and would like to know how you finished off the same level as your oven floor?

    Ashley

    Leave a comment:


  • Liteceeper
    replied
    Re: New pre-cut kit build in Adelaide

    Originally posted by benguilford View Post
    Your oven sir, is looking fantastic. Your attention to detail (particularly at the top of the dome) was way beyond what I would normally expect to see! Nice work. I'll email you about getting my hands on some of your build photos.
    Thanks Ben for the kudos, happy to let you use what ever photos you like.

    Leave a comment:


  • benguilford
    replied
    Re: New pre-cut kit build in Adelaide

    Your oven sir, is looking fantastic. Your attention to detail (particularly at the top of the dome) was way beyond what I would normally expect to see! Nice work. I'll email you about getting my hands on some of your build photos.

    Leave a comment:

Working...
X