Starting new build in Dallas

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • UtahBeehiver
    Member Moderator
    • May 2012
    • 5260

    #61
    I see the carbon has burning off nicely. If you do not have one yet, get or make a banjo peel for turning your pies, I make my share of accidental "calzones" while learning how to use my oven.
    Russell
    https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

    Comment

    • Chach
      Master Builder
      • Mar 2018
      • 635

      #62
      Very nice design I like the round design. Also, your brick work is very clean. Really enjoyed seeing this come together.

      Ricky
      My Build Pictures
      https://onedrive.live.com/?authkey=%...18BD00F374765D

      Comment

      • Dwatkins
        Laborer
        • Jul 2018
        • 62

        #63
        Hey Russell, I did pick up a small 9" peel and yes it is a little tricky.
        Ricky I appreciate the compliment.

        This pic was taken about 3 weeks ago and shows the oven finished but I still need to complete the trim around the top. I left the brick down about and inch under the pergola and will put wire screen to cap the opening and then trim with a cedar. Want to have a little ventilation and also keep any small animals from making a home inside. Also trying to finish up the flag stone around the base and will show a finished walk around in a week or so.

        Comment

        • Dwatkins
          Laborer
          • Jul 2018
          • 62

          #64
          The oven turned out better than I expected. I still need to do a little trim around the top, build a wood door to cover the lower wood storage area and the door to the oven. It holds heat very well and could not be more pleased. I did build this small serving table which works very well when pulling pies from the oven I have a place to sit and cut them.

          Comment

          • UtahBeehiver
            Member Moderator
            • May 2012
            • 5260

            #65
            Turned out quite nice.
            Russell
            https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

            Comment

            • Alomran
              Apprentice
              • Jul 2016
              • 170

              #66
              Congratulations on the beautiful oven. nice set up as well. very well done!

              Comment

              • Dwatkins
                Laborer
                • Jul 2018
                • 62

                #67
                Alomran,
                thanks, we are really enjoying it

                Comment

                Working...