Re: K79 Oven Build
Congrats on the oven and the pies!!
Chris
X
-
Re: K79 Oven Build
They look really good. The first batch makes the work worthwhile doesn't it? Hard to believe that it only gets better from there. Not sure if there is a milestone award for first cook but there should be. Congratulations.
Leave a comment:
-
Re: K79 Oven Build
The pies look great!
It looks like I am just a couple of days behind you.....can't wait.
Leave a comment:
-
-
Re: K79 Oven Build
I think you're gold at this point.. Clear the dome!
C
Leave a comment:
-
Re: K79 Oven Build
If you got it to 725F, your curing procedure is over, you now have a finish oven. Take a break from reading and writing on the forum and get to know your WFO and see the joy she can bring into your life. Darn it, COOK SOMETHING!
Leave a comment:
-
Re: K79 Oven Build
Hey guys posting from my cell outside pics to come. Just had a venison sausage egg and cheese wrap from the oven
Question: my last cure fire was held around 725F for 5 hours. Is it ok finally to have my raging fire and clear the dome. It's a third clear now up top. I've been holding 800F for an hour but I want to load it up???
Leave a comment:
-
Re: K79 Oven Build
79, how are things going? More pictures please..
Chris
Leave a comment:
-
Re: K79 Oven Build
Congratulations ..........food looks yummy......can't wait to use mine.
Leave a comment:
-
Re: K79 Oven Build
Did you take any pics of the bread cooking!!!! Lets see
Leave a comment:
-
Re: K79 Oven Build
Hey everyone...
I just completed day 6 of my curing fires and I was around 600F today +/- 25F as best I could. Anyone know at what temps I need to start looking for cracks?
Side note, I made venison meatballs in there tonight with a couple of loaves of Italian bread and some homemade gravy "sauce". I love this oven
Leave a comment:
-
Re: K79 Oven Build
I noticed that with the larger pieces you get a more consistent temp than the smaller ones bursting into flames haha. Only issue is getting the coals hot enough below the larger log to keep them lit. I had a few spikes in temp along the way but nothing that lasted more than a few seconds. If something got out of hand I either took the wood out and put it in my fire pit or put my shovel over it in the oven. I found having a fire going in my pit and transferring the lit log to a bed of coal is a nice way to introduce a log instead of a fresh one that can "spontaneously combust"
Leave a comment:
-
Re: K79 Oven Build
no, it doesn't look too aggressive. The difficult part will be maintaining temp with a wood fire without it spiking. A 600 degree fire can become an 800 degree fire in a matter of seconds. At that temp, the wood will pretty much spontaneously combust. Kind of counter-intuitive, but I find it easier to maintain temperature with bigger pieces of wood than with smaller pieces - which flash ignite.
Leave a comment:
-
Re: K79 Oven Build
Hey guys,..
My oven curing so far (average temps):
Day 1: 250F for 8 hours used 1400 watts
Day 2: 300F for 13 hours used charcoal
Day 3: 350 for 12 hours used charcoal and small amounts of wood
Day 4: 425 for 12 hours used charcoal and medium amounts of wood
Day 5: 525 for 6 hours used small amount of charcoal and larger amounts of wood
Tonight is night 6..
Night 6: Aiming for 600F for 6 hours mostly wood
Night 7: Aiming for 675F for 6 hours wood
Night 8: Aiming for 750F for 6 hours wood
Night 9: Aiming for 825F for 6 hours wood
Day 10: Aiming for +900F for 6 or so hours.... my big and final fire.
Does this look to agressive for fires 6-10?
Leave a comment:
Leave a comment: