Announcement

Collapse
No announcement yet.

40” Pompeii in Rhode Island

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    I'm glad my arch brick description helped, and congrats on customizing your IT to make it work for you.

    I can't comment on squirrel tail, others are better suited. I recall DavidS having some concise input when others have asked in the past. If incorrect, my apologies for drawing you in David!
    Mongo

    My Build: https://community.fornobravo.com/for...-s-42-ct-build

    Comment


    • #47
      I managed to clear the inner arch. I did end up with a small case of “the dreaded droop.” In my case it was about 1/4”. I did also get out of round in way of the arch by about 3/8”. I compensated for the droop with the next course and got back to mostly round in two courses. I only have two courses left and then the plug. Hoping to have the dome done by the end of this coming weekend.

      I start needing to fight gravity by using sticks to prop up the bricks while the mortar set at course 9. I have also been following Russel’s advice of morning the first brick of the next course as soon as I finish the previous one.

      As for the squirrel tail vs. not, I’m leaning towards not. I think having a vertical chimney will be a good amount easier to build and more likely to perform properly.

      Attached Files

      Comment


      • #48
        The dome is complete! Putting that last brick in is a good feeling. Time to get going on the outer arch and flue now.
        Attached Files

        Comment


        • #49
          Congrats, nice and tidy brick work
          Russell
          https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

          Comment


          • #50
            Nice! Congrats!
            Mongo

            My Build: https://community.fornobravo.com/for...-s-42-ct-build

            Comment

            Working...
            X