Announcement

Collapse
No announcement yet.

42" build in Central Texas

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Re: 42" build in Central Texas

    On Dampers - I don't have one but have given them some thought (there will always be another oven) and with my experience of slow combustion stoves tells me that it should work ok. I reckon that a slide damper at the base of the flue combined with an adjustable vent in the bottom of a door that closes to the outside of the entry (outside the flue) would work. It should enable the fire to be maintained at a slow burn.

    I guess it depends on how you want to manage your oven temps.

    Just a thought.
    Cheers ......... Steve

    Build Thread http://www.fornobravo.com/forum/f3/n...erg-19151.html

    Build Pics http://www.facebook.com/media/set/?s...1&l=1626b3f4f4

    Forno Food Pics https://www.facebook.com/media/set/?...1&l=1d5ce2a275

    Comment


    • #62
      Re: 42" build in Central Texas

      Originally posted by Tscarborough View Post
      Once the heat hits the damper, it is already gone from being usable in the oven. All it does is deflect it from the chimney out the outer arch. No possible use, other than deflecting the heat from around the congruent area (the chimney) to an in-congruent area (the face of the oven).
      I see what you are saying now The door is on the inner arch (reveal) and the flue/damper is outside of that airspace anyway. You would have to have a door on the outer arch and damper to stop any airflow.
      Im still in the mindset, thinking about the way my Green Egg and trailered smoker is set up with an air intake and outlet to control heat.
      My build documentary page:
      https://picasaweb.google.com/1011587...iredOvenBuild#


      Avoid at all costs that vile spew you see rotting in oil in screwtop jars. Too lazy to peel fresh? You don't deserve to eat garlic." Bourdain

      Comment


      • #63
        Re: 42" build in Central Texas

        Originally posted by GarnerAC View Post
        I see what you are saying now The door is on the inner arch (reveal) and the flue/damper is outside of that airspace anyway. You would have to have a door on the outer arch and damper to stop any airflow.
        Im still in the mindset, thinking about the way my Green Egg and trailered smoker is set up with an air intake and outlet to control heat.
        Gudday
        The WFO with its 63 per cent door to roof height is pretty much self regulating.
        Heat builds up inside, the entrance height lets so much out so more is drawn in at the bottom. With more air drawn in at the bottom more fuel is burnt and the cycle goes on . It's hands off really and the main variable is the wood. Don't feed the fire and things slow down. Stuff the oven to full of wood you restrict the air flow and the process slows and gets smoky and slow. Get it right (easy) and you don't even get any visible smoke.
        Never ceases to amaze me and you'll enjoy the process of starting and maintaining a fire I'm sure
        Regards dave
        Measure twice
        Cut once
        Fit in position with largest hammer

        My Build
        http://www.fornobravo.com/forum/f51/...ild-14444.html
        My Door
        http://www.fornobravo.com/forum/f28/...ock-17190.html

        Comment


        • #64
          Re: 42" build in Central Texas

          Originally posted by GarnerAC View Post
          ........ You would have to have a door on the outer arch and damper to stop any airflow........
          .
          If you change the word stop to regulate, then you will have nailed it . I was able to use the damper and an outer arch "blast door" to regulate the temperatures of my oven fairly well during the curing phase. I have also been able to regulate the temperature on a couple of brisket cooks. One had smoldering coals in the oven, the other was a cleaned out, but still, very hot oven. I was trying to keep the brisket between 225 and 250 degrees. In both cases, the oven was considerable bit hotter than what I wanted the cooking temp of the brisket to be. Both turned out pretty well for an experiment. To get the most out of a damper, the oven will definitely need an outer arch door. You wont be controlling the temp of the oven, just the area between the flue entry and the oven entry.
          Joe Watson " A year from now, you will wish that you had started today" My Build Album / My Build

          Comment


          • #65
            Re: 42" build in Central Texas

            Agreed Gulf. My notion was that with a damper and control of the air entering the chamber it should be possible (if they are adjusted right) to maintain a slow burning fire on a bank of coals for an extended time. It should be able to be done without a smokey result.

            With a slow combustion stove it is possible to get it hot, load it up with thick timber and then once it has caught, restrict both the air intake and damper and that will burn hot and slow for overnight at least.

            It should enable the oven to be maintained fully charged for longer.

            Thoughts?
            Cheers ......... Steve

            Build Thread http://www.fornobravo.com/forum/f3/n...erg-19151.html

            Build Pics http://www.facebook.com/media/set/?s...1&l=1626b3f4f4

            Forno Food Pics https://www.facebook.com/media/set/?...1&l=1d5ce2a275

            Comment


            • #66
              Re: 42" build in Central Texas

              Gudday
              Now I have got my mind around an outer door with a air regulator this clicks in.
              I still maintain though these ovens are self regulating so why muck with something that simply works. I can see this regulation being important for an inside build or an extra long chimney for example. But for a bog standard oven...
              I'm very interested in this conversation though and am definitly keeping an open mind
              Regards
              Measure twice
              Cut once
              Fit in position with largest hammer

              My Build
              http://www.fornobravo.com/forum/f51/...ild-14444.html
              My Door
              http://www.fornobravo.com/forum/f28/...ock-17190.html

              Comment


              • #67
                Re: 42" build in Central Texas

                I think this has helped me decide NOT to put one in. What drew me to a WFO originally was the primal simplicity of it.
                It's a brick dome that you build a fire in and cook food with!
                My build documentary page:
                https://picasaweb.google.com/1011587...iredOvenBuild#


                Avoid at all costs that vile spew you see rotting in oil in screwtop jars. Too lazy to peel fresh? You don't deserve to eat garlic." Bourdain

                Comment


                • #68
                  Re: 42" build in Central Texas

                  That concept is predicated upon a similar airflow as exists when the oven is in normal operation. That is to say, air is drawn in low, circulates through the oven and exits high. It may well do so, but I do not think it will. Any restriction in the inflow will cause the inflow to be directed directly out the damper and not into the oven.

                  I may be wrong, but if I am they have been building smokers totally wrong all these years.

                  Comment


                  • #69
                    Re: 42" build in Central Texas

                    Originally posted by GarnerAC View Post
                    I think this has helped me decide NOT to put one in. What drew me to a WFO originally was the primal simplicity of it.
                    It's a brick dome that you build a fire in and cook food with!
                    Originally posted by GarnerAC View Post
                    I saw that Gulf had a clever one. I have access to all kinds of dampers, levers and air control devices in my trade so why not put one in?
                    Oh GAC,
                    Please don't throw the towel in so soon. You have access To all kind of neat toys as myself. Our jobs allow us the opportunity to play a little. If we want primal we can just shut them off. ........... I just added some T\C to my build and hope to do some neat things with them................. Live a little will ya.
                    Respectfully,

                    KB

                    My build
                    Oven Pics (album under construction)

                    Comment


                    • #70
                      Re: 42" build in Central Texas

                      Yeah that was tempting because I have all the meters and temp measuring devices too, but I had to force myself to stick to simplicity!
                      "Not that theres anything wrong with it"

                      It will be interesting to see what temps you see at those 3 locations.
                      My build documentary page:
                      https://picasaweb.google.com/1011587...iredOvenBuild#


                      Avoid at all costs that vile spew you see rotting in oil in screwtop jars. Too lazy to peel fresh? You don't deserve to eat garlic." Bourdain

                      Comment


                      • #71
                        Re: 42" build in Central Texas

                        I have been mentally toying around with the idea of an inner door with a PID-controlled regulator/fan and two openings in order to use the oven as a smoker/slow cook BBQ. I am not sure it would work, but it would be cool to be able to maintain temps of 200 or so for long periods. Adding an outer door and a damper to that equation seems like it would make it a more complicated task.
                        My build progress
                        My WFO Journal on Facebook
                        My dome spreadsheet calculator

                        Comment


                        • #72
                          Re: 42" build in Central Texas

                          If your oven is well insulated you can maintain even temperatures for very long periods of time without any regulation. Last week on Day 3 after firing the temperature in my oven was about 320 degrees. I wanted to cook at 250 - so I left the door off for about 3 hours and got the temp to around 260. I then placed my dutch oven with lamb stew in it, closed the door, and left it the whole day. At the end of the day the temp had only dropped to around 245.

                          Comment


                          • #73
                            Re: 42" build in Central Texas

                            yeah, that is true. I was thinking about being able to maintain a flame for smoking - but I don't want to take the thread sideways
                            My build progress
                            My WFO Journal on Facebook
                            My dome spreadsheet calculator

                            Comment


                            • #74
                              Re: 42" build in Central Texas

                              I agree - that would be more challenging!!

                              Smokers are not that expensive!

                              Comment


                              • #75
                                Re: 42" build in Central Texas

                                Originally posted by GarnerAC View Post
                                Yeah that was tempting because I have all the meters and temp measuring devices too, but I had to force myself to stick to simplicity!
                                "Not that theres anything wrong with it"

                                It will be interesting to see what temps you see at those 3 locations.
                                Gac,

                                Sounds like your sticking to simplicity. I understand, my thinking keeps me going over budget, I keep trying to simplify my life but there is away a new project around the corner.

                                I'm on my third day of fire curing. Keeping temperatures low is a task especially after the addition of insulation. I will try to post some data on the temperatures of thermocouples later on my thread.

                                Since it sound like simplicity is in your future and we don't want to high jack your thread. I will post more comments about dampers and gadgets on my thread.

                                Hope your surgery goes well.
                                Respectfully,

                                KB

                                My build
                                Oven Pics (album under construction)

                                Comment

                                Working...
                                X