Pompeii Oven Construction

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Topics	Statistics	Last Post
Sticky: Oven opening size by james Started by james, 06-07-2006, 12:40 PM	72 responses 74,980 views 1 like	Last Post by Phartog 03-20-2026, 06:24 AM
Sticky: Pompeii Plans Ready for Download by james Started by james, 03-11-2007, 07:10 AM	45 responses 53,679 views 0 likes	Last Post by JRPizza 11-07-2023, 10:42 PM
Sticky: FB Pompeii Oven Kit by james Started by james, 05-07-2009, 11:03 AM	76 responses 37,187 views 0 likes	Last Post by Chops 08-30-2021, 08:58 AM
Sticky: Firebrick Primer by james Started by james, 06-27-2006, 12:56 PM	29 responses 26,581 views 0 likes	Last Post by rwiegand 09-22-2018, 07:59 AM
Sticky: Recommended changes by james Started by james, 03-18-2007, 10:54 AM	55 responses 31,092 views 0 likes	Last Post by daveskis 06-11-2017, 12:15 PM
Sticky: Leave a reveal at the entry to the oven by james Started by james, 10-26-2006, 05:43 AM	36 responses 31,478 views 0 likes	Last Post by SpottedFrog 12-08-2013, 08:52 PM
A&M's 42inch Pompeii by waynespizzaworld Started by waynespizzaworld, 03-04-2011, 08:40 PM	28 responses 3,497 views 0 likes	Last Post by waynespizzaworld 07-22-2011, 07:35 PM
Paul's Canberra build by Mahootna Started by Mahootna, 12-31-2009, 09:56 PM	25 responses 4,307 views 0 likes	Last Post by david s 07-21-2011, 01:31 PM
Refractory Cast Dome Top? by md_massimino Started by md_massimino, 07-20-2011, 02:43 PM	2 responses 1,730 views 0 likes	Last Post by md_massimino 07-20-2011, 06:54 PM
Question about gaps in mortar joints by Santino Started by Santino, 07-05-2011, 12:58 PM	22 responses 4,094 views 0 likes	Last Post by Santino 07-19-2011, 08:19 PM
Bop's build by bop Started by bop, 07-18-2011, 10:23 PM	2 responses 972 views 0 likes	Last Post by Millstone Man 07-19-2011, 04:05 PM
vermiculite alone or mix with concrete by jdefeo Started by jdefeo, 07-11-2011, 11:32 AM	4 responses 1,849 views 0 likes	Last Post by jdefeo 07-19-2011, 08:38 AM
soldiers cut at angle? by firebert Started by firebert, 07-12-2011, 03:14 PM	6 responses 2,235 views 0 likes	Last Post by Cheesesteak 07-14-2011, 10:28 AM
Vegas Pompeii getting off the ground by cvcrash Started by cvcrash, 03-01-2011, 07:06 PM	37 responses 5,155 views 0 likes	Last Post by cvcrash 07-13-2011, 08:02 PM
36" no masonery experience in CT by firebert Started by firebert, 07-11-2011, 06:53 PM	1 response 955 views 0 likes	Last Post by Aegis 07-13-2011, 07:42 PM
Chimney height and diameter by cholme Started by cholme, 07-12-2011, 12:07 AM	4 responses 1,964 views 0 likes	Last Post by cholme 07-12-2011, 09:41 AM
Slab question... by NYC Started by NYC, 07-11-2011, 12:19 PM	11 responses 1,680 views 0 likes	Last Post by NYC 07-12-2011, 07:54 AM
Curing question by cholme Started by cholme, 07-10-2011, 11:43 PM	6 responses 1,042 views 0 likes	Last Post by cholme 07-11-2011, 05:33 PM
cast hearth problems (powdery) by sonomacast Started by sonomacast, 07-07-2011, 02:08 AM	5 responses 1,111 views 0 likes	Last Post by sonomacast 07-11-2011, 01:02 PM
Perlite Insulation Board by dlebla Started by dlebla, 07-08-2011, 09:26 AM	3 responses 1,515 views 0 likes	Last Post by dlebla 07-09-2011, 07:35 PM
alternative cheap insulation? by catacomb Started by catacomb, 06-28-2011, 01:49 AM	15 responses 4,474 views 0 likes	Last Post by david s 07-07-2011, 03:19 PM
Building the stand to 32" high out of blocks issue? by gsanto Started by gsanto, 07-02-2011, 12:34 PM	5 responses 1,029 views 0 likes	Last Post by dmun 07-07-2011, 12:45 PM
Thickness of Hearth by GeorgePalmer Started by GeorgePalmer, 07-06-2011, 02:33 PM	2 responses 1,083 views 0 likes	Last Post by GeorgePalmer 07-07-2011, 02:02 AM
Opinions needed on this Firebrick by summerj Started by summerj, 07-01-2011, 08:58 AM	4 responses 1,282 views 0 likes	Last Post by pizza_bob 07-06-2011, 02:48 PM
Different method for a flat opening by cholme Started by cholme, 07-06-2011, 11:16 AM	2 responses 1,008 views 0 likes	Last Post by david s 07-06-2011, 02:18 PM
Floor Size by Forgeblast Started by Forgeblast, 07-04-2011, 03:49 PM	2 responses 982 views 0 likes	Last Post by Forgeblast 07-04-2011, 07:15 PM

Previous 1 22 62 69 70 71 72 73 74 75 82 122 130 template Next

No topics found.

Mark This Channel Read

Working...

Announcement